How To Repair Tools Tinkers Construct
Tools in Tinker’s Construct can be repaired by using the Tool Station Part Builder or by crafting a Repair Kit. The Tool Station and Part Builder can be used to repair tools without any crafting.The first thing you need to do when your tool breaks is identify the broken part.
Once you know which part is broken you can use the Tool Station or Part Builder to repair that part.If you don’t have access to a Tool Station or Part Builder you can craft a Repair Kit. To do this you’ll need 1 Clay 1 Iron and 1 Stone.
Put these items in a crafting grid in any order and you’ll have a Repair Kit.Once you have a Repair Kit right-click on the broken tool with the Repair Kit in your hand. This will bring up a menu that will allow you to select which part of the tool you want to repair.
Left-click to select the part then right-click to repair it.You can also use the Tool Station or Part Builder to repair tools that have been damaged by the environment such as by fire water or lava. To do this simply right-click on the damaged tool with the Tool Station or Part Builder in your hand.
Congratulations! You now know how to repair tools in Tinker’s Construct.
What is the best way to repair a damaged tool?
Table of Contents
The best way to repair a damaged tool is to use another tool to repair it.
What are the most common ways to damage a tool?
The most common ways to damage a tool are by using it incorrectly or by not using it properly.
How often should you repair your tools?
You should repair your tools as soon as they become damaged.
What are some signs that a tool needs to be repaired?
Some signs that a tool needs to be repaired are if it is not working properly or if it is damaged.
What are the consequences of not repairing a tool?
The consequences of not repairing a tool can be that the tool will not work properly or that it will break.
How can you prevent your tools from becoming damaged?
You can prevent your tools from becoming damaged by using them properly and by taking care of them.
What is the best way to clean a tool?
The best way to clean a tool is to use a cleaning solution and a cloth to wipe it down.
How often should you clean your tools?
You should clean your tools as often as they become dirty.
What are some signs that a tool needs to be cleaned?
Some signs that a tool needs to be cleaned are if it is not working properly or if it is dirty.
What are the consequences of not cleaning a tool?
The consequences of not cleaning a tool can be that the tool will not work properly or that it will break.
How can you prevent your tools from becoming dirty?
You can prevent your tools from becoming dirty by using them properly and by taking care of them.
What is the best way to store a tool?
The best way to store a tool is in a dry cool place.
How often should you store your tools?
You should store your tools as often as they become dirty.
What are some signs that a tool needs to be stored?
Some signs that a tool needs to be stored are if it is not being used or if it is dirty.
What are the consequences of not storing a tool?
The consequences of not storing a tool can be that the tool will not work properly or that it will break.
Tinker's Construct — Auto Repair mechanics?
They stack linearly, yes. Also, it doesn’t stop at 3. You can have as much moss on your tool as you want.
Light doubles the speed at which it repairs.
It auto-repairs even if you’re not holding it.
I may be wrong on the 4th question. My paper rapier has one piece of moss on it, and it repairs incredibly fast, while my hammer takes a lot longer to repair with moss.
Mahoka
New Member
- Aug 3, 2013
- #3
PeggleFrank
New Member
- Aug 3, 2013
- #4
Riuga
New Member
- Aug 3, 2013
- #5
They stack linearly, yes. Also, it doesn’t stop at 3. You can have as much moss on your tool as you want.
Light doubles the speed at which it repairs.
It auto-repairs even if you’re not holding it.
I may be wrong on the 4th question. My paper rapier has one piece of moss on it, and it repairs incredibly fast, while my hammer takes a lot longer to repair with moss.
Flyin_spaghetti
New Member
- Mar 18, 2014
- #6
Wagon153
New Member
- Mar 18, 2014
- #7
AlanEsh
New Member
- Mar 18, 2014
- #8
Pyure
Not Totally Useless
- Mar 18, 2014
- #9
I respect someone who declares they are about to summon the dead.
PS I always prefer opening an old thread to starting up a new one; makes it easier for folks to search for specific information and hopefully not get a bunch of conflicting threads.
I can’t get by the early-game with just Repair on a hammer; I use it too much. Flux or battery for me. Gotta be able to recharge it on demand. Excavator, lumber axe and pretty much anything else on the other hand are fine with Repair.
Тема: [Divine’s | Magic] Недорогие неразрушимые инструменты [Tinker Construct]
Наблюдатель 
[Divine’s | Magic] Недорогие неразрушимые инструменты [Tinker Construct]
Создание обсидиановых неразрушимых инструментов из мода Tinker’s Contruct.
Показано будет на примере молота
Спойлер: Нам понадобится .
— Инженерная станция или инженерная кузница
— Стол для вырезки схем
— Конструктор деталей
Спойлер: Кузня, станция, стол и конструктор
Спойлер: Разница между кузней и станцией
— Обсидиан (в гайде было использовано ровно 64 обсидиана)
— Бумага (В количестве до стака)
— Пустая схема (в зависимости от нужного инструмента, минимум 4 схемы)
— 1 алмаз
— 1 золотой блок
Спойлер: Приступаем к крафту составляющих
Спойлер: Схема крафта молота в кузне
Спойлер: Интерфейс стола для вырезки и пример готовых схем
Как только мы сделали все нужные для нас схемы, переходим к конструктору деталей. В левый слот кладём схему, а в правый — материал.
Теперь важный момент! В Вашем инструменте из обсидиана должны быть сделана только компонент, который отвечает на добычу (для кирки — обух кирки, для топора — обух топора, для меча — лезвие меча, для молота — боёк молота).
Спойлер: Крафт обсидианового бойка молота
Спойлер: Бумажные компоненты
Спойлер: Крафт обсидиановых пластин в конструкторе деталей
Спойлер: Создание нашего инструмента
Спойлер: Пример молота
Спойлер: Заточка инструмента пластинами
Спойлер: Как это будет выглядеть
Спойлер: Где искать это?
Спойлер: Добавление модификатора
Спойлер: Неразрушимый молот
Спойлер: Небольшой апгрейд инструмента на примере молота
Спойлер: Добавление ещё одного модификатора
Спойлер: Откуда взять золотое яблоко?
Спойлер: Заточка лазуритовыми блоками
Спойлер: А звезду откуда брать то?
Спойлер: Добавление модификатора звездой Ада
Спойлер: Крафт кристалла и готовый молот
Спойлер: Мои гайды (кликабельные)
6 пользователей сказали cпасибо MercuryANEZ за это полезное сообщение:
- Просмотр профиля
- Сообщения форума
- Личное сообщение
- Репутация
Новичок 
Спасибо за гайд, ранее и не знал, что в Тинкере (название мода) можно делать "Несокрушимые" предметы. Я даже сегодня опробовал его на Divine 2, все получилось, вот только скорость добычи у него так себе, как по мне лучше сделать молот из Аллюментиума, не столь дорогой металл и очень эффективный, а если сломается — не беда, всегда можно с легкостью восстановить.
Кстати, если кто не знал. Инструменты из Тинкера ломаются до конца и не исчезают, а становятся просто не дееспособными, копаешь и не боишься что пропадет после потери прочности
- Просмотр профиля
- Сообщения форума
- Личное сообщение
- Репутация
Новичок 
Сообщение от FPSs
Спасибо за гайд, ранее и не знал, что в Тинкере (название мода) можно делать "Несокрушимые" предметы. Я даже сегодня опробовал его на Divine 2, все получилось, вот только скорость добычи у него так себе, как по мне лучше сделать молот из Аллюментиума, не столь дорогой металл и очень эффективный, а если сломается — не беда, всегда можно с легкостью восстановить.
Кстати, если кто не знал. Инструменты из Тинкера ломаются до конца и не исчезают, а становятся просто не дееспособными, копаешь и не боишься что пропадет после потери прочности
Я конечно всё понимаю,но это я не понял. У тебя есть неразрушаемый предмет на который ты тратишь ресурсы всего-лишь раз,к примеру ты хочешь весь вайп рубить сумеречный лес,ну деревья которые имеют в своей структуре 1000+ блоков,и что ты хочешь сказать,чтобы я бегал каждый раз и чинил этот же топор? (Так же я могу привести пример о других 18 инструментах)
Тут гайд о неразрушимых инструментах,твоё дело — юзать или не юзать.
How to Repair Tinkers Construct Tools
You can repair a broken tool by applying binding agents. These compounds do not last nearly as long as smelting, but they can be very effective in repairing broken tools. The best binding agent is bonemeal, and a broken anvil has two repair slots. One repair slot uses less materials, while the other provides about 30% more durability. If you have broken tools, repair them with binding agents to extend their useful life.
Table of Contents
Anvil
When constructing Tinkers’ Construct tools, you will use an Anvil. This item has two main functions: repairing and crafting. To repair your tool, you must use the hammer to strike it on the Anvil. Once the tool is repaired, you can add modifiers like speed, damage, Fortune, and Silk Touch. The statistics for each tool are displayed on the right side. If you are unable to find a tool you need, you can use Binding Agent.
Anvils are vanilla Minecraft blocks, and they obey gravity. Any entity ‘hit’ by an anvil takes damage, and the distance it falls affects the amount of damage. However, anvils are not necessary for renaming backpacks, but they can be used to rename weapons, books, and Tinkers’ Construct tools. But, be aware that they do not rename backpacks!
Miasma Vial
After completing a Tinkers Construct Tool, he will eventually need to repair the Miasma Vial on it. This small device powers the gadget, but only has a limited time and will turn off if it runs out of power. To fix it, the Tinker must spend gold or a Downtime Day repairing it. But how do you repair a Miasma Vial?
The simplest way to repair the Miasma Vial on a Tinkers Construct tool is to resmelt it with a heat source that produces light. This requires an extra tool head, which can be made from cobblestone. Then, you will need three blocks to re-assemble the tool’s head. After you’ve done this, you should have two new tool heads, or three spare ones.
Stone Stairs
You can repair damaged Stone Stairs using Tinkers Construct Tools. Unlike other repairs, Stone Stairs don’t cost much, but they’re not very durable. You can also use scaffold blocks to repair tools. Scaffold blocks are very expensive and don’t provide any durability. This method is only recommended if you have no other materials. Here are a few tips to repair broken tools.
First, use a heat source that emits light to resmelt the tool’s heads. Then, you’ll need three blocks and a gold ingot. If the damage is minor, you can make an extra tool head out of the cobblestone. It will take longer to repair a large amount of damage, but will be worth it in the long run. Afterwards, you can use your tools to repair Stone Stairs.
Scaffold blocks
Tinkers Construct tools are a must-have for all builders, as they allow players to collect resources more efficiently and speed up the creation of other tools. But like any tool, though, eventually they’ll break, so they need to be repaired. In this guide, we’ll explain how to repair Tinkers Construct tools and what resources they require. If you’re having trouble fixing your tools, don’t worry! The following tips will help you get back up and running as soon as possible!
During construction, Tinkers can build a variety of tools, from swords to armor. In addition, they can upgrade their tools by using Tool Stations. Each of these stations adds a certain amount of additional abilities to each tool. These abilities vary according to the material you use to create your Tinkers Construct tools. After repairing your tools, you’ll be able to use them for even greater benefits!